Ae Electric Store
Ae SPLITTER Box, Input 100A 125/250V to two 50A 125/250V (240/120v) with Voltmeter and Ammeter built-in MOD 10200
Ae SPLITTER Box, Input 100A 125/250V to two 50A 125/250V (240/120v) with Voltmeter and Ammeter built-in MOD 10200
No se pudo cargar la disponibilidad de retiro
NORMALLY is USED to CONNECTIONS with 240V/120V Single-phase (Rated voltage 125/250V)
Delivery two 50 Amp 125/250V power outputs, from an input 100 Amp 125/250V.
This AE SPLITTER 100A Box offers the following characteristics:
Breaker protection on each outlet. Two 50A breakers protect the cables connected to each outlet, to prevent damage from overcurrent or short circuit on the outputs.
DO YOU WANT TO BE SURE YOUR BOAT IS PROTECTED ?
Don't use just any splitter that lacks individual breakers for protection.
Digital voltmeter and ammeter. Allows monitoring the voltage that is delivered through the 50A Outlets or receptacles and verifying the current consumption at all times
Two 50A 125/250V output receptacles fully covered and waterproof. Adds safety and avoids the humedity can go inside to the receptacles
Works as an adapter between a 100A pedestal receptacle and a 50A shore cord plug. This can be taken advantage of when a dock pedestal with a single phase 50A 240V (125/250V) outlet is not available
Correct input power cable size. A 4 feet of cable with a 100A 125/250v plug, will make it easy to connect the Splitter box on any pedestal receptacle
Lighter and smaller / comfortable : with smaller dimensions compared to other Splitter, our Ae Splitter Box is more practical to store when is not in use
To CONNECT: Place the 100A power pedestal breaker in the OFF position. Insert the 100A plug into the receptacle on the pedestal. With the 50A Splitter box breakers in the OFF position, connect the cord plugs into outlets #1 and #2 on the side of the Splitter box. Finally, turn on the 100A pedestal breaker and then turn on the 50A Splitter box breakers.
To DISCONNECT: Turn OFF each 50A Splitter box breaker and disconnect the plugs of the outlets #1 and #2. If you want disconnect completely the Splitter box, place OFF the 100A pedestal receptacle breaker and unplug the input Splitter box plug
TECH DATA:
Synthetical description: AE SPLITTER 100A BOX
Rated current: …..….... 100A
Poles: …………….............. 3P 4W
Hour position: ….…....... 12h
Rated voltage: ............... 125/250V
Colour: ................................ ORANGE (Male)
Material: ............................ THERMOPLASTIC
Protection degree: ....... Watertight
Protection degree IP: .. IP67
Types available outlets: STRAIGHT
Cable outlet: ..................... CABLE GLAND
APPLICABLE STANDARDS AND LAWS FOR PARTIES INVOLVED
UL 1682 [American Standard] Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type and MIL-C-5756C: 600-volt heavy duty, portable, power, single and multiconductor, electrical cable for severe flexing service IEC 60309-1 (1999) [International Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements IEC 60309-2 (1999) [International Standard] Plugs, socket-outlets and couplers for industrial purposes. Part: 2: Dimensional interchangeability requirements for pin and contact-tube accessories UL 486E [American Standard] Equipment wiring terminals for use with aluminum and/or copper conductors CSA C22.2 No. 182.1 (1988) [Canadian Standard] Industrial Locking Type, Special Use Attachment Plugs, Receptacles, and Connectors, Wiring Products CSA C22.2 No. 65-93 [Canadian Standard] Wire connectors wiring products DIRECTIVE LOW VOLTAGE 2014/35/UE [European Directives] Low Voltage Directive
Share
Don't overlook a short circuit that could lead to a fire. This unit makes troubleshooting easy. If an output fails, individual circuit breaker protection helps isolate the issue without affecting the rest of the system, keeping my boat safe. I would prefer the main cable to be yellow.
Thank you for your feedback.
The AeElectricStore Splitter Box has been an excellent purchase for my boat; as soon as I plug it in, it displays the shore power voltage. Its construction is robust, and it is clearly built for marine use, not a makeshift solution. Thanks to its reliable performance, protective capabilities, and material quality, I consider it a superior choice compared to others on the market
You are welcome
The voltmeter and amp meter are very useful at the dock. We can see the voltage coming from the pedestal and monitor the current draw on each output. It gives the crew more confidence when connecting shore power
Thank you for your feedback.
I manage a 70-foot Nordhavn for a family. This unit has been a lifesaver! It has allowed me to dock in places that only have single-phase 100A connections. It works beautifully and is very easy to use; plus, the extra circuit breakers help me identify which phase has failed (on our boat, one cable powers general services and the other runs all the HVAC systems). The digital display makes it easy to diagnose which part of the boat is drawing too much power, without having to guess whether the issue stems from faulty or worn-out marina breakers. I've also noticed that some marinas charge a bit more for two 50A connections than for a single 100A connection; with this device, I can choose the cheaper option! A little trick: stating that you need 100A when making a reservation can lead some marinas to assign you better berths designed for superyachts. :)
Thank you for your feedback.
This splitter is excellent. It is well-designed, featuring a 50-amp breaker on each phase. We now have the flexibility to connect to a 100-amp power supply safely and in compliance with regulations
We appreciate your trust in our shore power products.